System:dsp - Agilent Technologies InfiniiVision 4000 X-Series Programmer's Manual

30
:SYSTem Commands

:SYSTem:DSP

Command Syntax
:SYSTem:DSP <string>
<string> ::= quoted ASCII string (up to 75 characters)
The :SYSTem:DSP command writes the quoted string (excluding quotation
marks) to a text box on- screen.
Use :SYStem:DSP "" to remotely remove the message from the display.
(Two sets of quote marks without a space between them creates a NULL
string.)
Press any menu key to manually remove the message from the display.
See Also •
912
(see page 1208)
"Introduction to :SYSTem Commands"
Agilent InfiniiVision 4000 X-Series Oscilloscopes Programmer's Guide
on page 910