Save:image:format - Agilent Technologies InfiniiVision 5000 Series Programmer's Manual

5
Commands by Subsystem

:SAVE:IMAGe:FORMat

Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {TIFF | {BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {TIFF | BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is
currently selected.
See Also •
•
•
•
•
•
•
308
(see page 586)
"Introduction to :SAVE Commands"
":SAVE:IMAGe[:STARt]"
":SAVE:IMAGe:AREA"
":SAVE:IMAGe:FACTors"
":SAVE:IMAGe:INKSaver"
":SAVE:IMAGe:PALette"
":SAVE:WAVeform:FORMat"
Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Guide
on page 303
on page 305
on page 306
on page 307
on page 309
on page 310
on page 314