Ipv6 Nd Ns-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ipv6 nd ns-interval
Syntax
Release Information
Description
Options
Mode
1062
ipv6 nd ns-interval milliseconds
no ipv6 nd ns-interval
Command introduced before JunosE Release 7.1.0.
Specifies the interval between IPv6 neighbor solicitation retransmissions on an interface.
The no version returns the interval between neighbor solicitation retransmission to its
default value (zero [0] milliseconds for router advertisements and 1000 milliseconds
for Neighbor Discovery activity of the E Series router).
milliseconds—Interval between IPv6 neighbor solicit transmissions
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
