Dead-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
dead-interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
dead-interval deadInterval
no dead-interval
Command introduced before JunosE Release 7.1.0.
Sets the time period that the OSPF router waits without seeing hello packets from a
remote neighbor before declaring the neighbor to be down. The no version restores the
default value.
deadInterval—Number in the range 1–65535 seconds; default value is 40 seconds
Remote Neighbor Configuration
Chapter 5: D Commands
473
Advertisement
Table of Contents
