L2C Ip Listen - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
l2c ip listen
Syntax
Release Information
Description
Mode
1144
[ no ] l2c ip listen
Command introduced before JunosE Release 7.1.0.
Creates a listening TCP socket at the virtual router within the ANCP context. ANCP needs
TCP sockets so that neighbors can open GSMP sessions. The no version removes the
listening TCP socket and stops any new sessions from being established. The no version
does not terminate any existing GSMP sessions.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
