Monitor Atm Vp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

monitor atm vp

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
monitor atm vp atm interfaceSpecifier vpi [ atm interfaceSpecifier vpi ]*
[ load-interval seconds ] [ display-time-of-day ]
Command introduced in JunosE Release 7.1.0.
Displays bit rate and packet rate statistics over a specified time interval for one or more
ATM virtual paths (VPs). There is no no version.
interfaceSpecifier—ATM interface specifier; see Interface Types and Specifiers on
page 5
vpi—Virtual path identifier of the PVC. The numeric range of the VPI depends on the
line module capabilities and current configuration.
seconds—Number of seconds in the range 5–300 that specifies the time interval at
which the router calculates bit rates and packet rates for the specified VP; default
value is 5 seconds
display-time-of-day—Sets time at which the router calculates the bit rate and packet
rate statistics for the current interval
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Privileged Exec, User Exec
Chapter 13: M Commands
1321