Ip Ospf Retransmit-Interval - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip ospf retransmit-interval
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip ospf retransmit-interval retransInterval
no ip ospf retransmit-interval
Command introduced before JunosE Release 7.1.0.
Specifies the time between LSA retransmissions for the interface when an
acknowledgment for the LSA is not received. The no version restores the default value.
retransInterval—Number in the range 0–3600 seconds; default value is 5 seconds
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
885
Advertisement
Table of Contents
