Ip Rsvp Bfd-Liveness-Detection - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip rsvp bfd-liveness-detection
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
{ ip | mpls } rsvp bfd-liveness-detection [ minimum-interval minInterval |
[ minimum-receive-interval minRecInterval ]
[ minimum-transmit-interval minTransInterval ] ] [ multiplier multValue ]
no { ip | mpls } rsvp bfd-liveness-detection
Command introduced in JunosE Release 8.1.0.
Enables BFD (bidirectional forwarding detection) on an interface running RSVP-TE and
defines BFD values to be negotiated between RSVP-TE neighbors for detection of IP
data path failures. See the mpls rsvp bfd-liveness-detection command for a complete
description and syntax.
Interface Configuration
Chapter 10: I Commands
935
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers