Ip Rip Receive Version - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

ip rip receive version

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip rip receive version { 1 | 2 | 1 2 | 2 1 | off }
no ip rip receive version
Command introduced before JunosE Release 7.1.0.
Restricts the RIP version that the router can receive on an interface. The no version sets
the interface back to the default value, receiving both RIP version 1 and version 2.
1—Specifies RIP version 1 only
2—Specifies RIP version 2 only
1 2—Specifies RIP version 1 and version 2
2 1—Specifies RIP version 2 and version 1
off—Turns reception off
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
921