isis authentication-key
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
isis authentication-key [ level-1 | level-2 ] authKey
no isis authentication-key [ level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Assigns a password for IS-IS level 1 and level 2 hellos used by neighboring routers that
are using IS-IS password authentication. The no version deletes the password.
level-1—Inserts the password into level 1 hello packets
level-2—Inserts the password into level 2 hello packets
authKey—Password; string of up to 8 characters
Interface Configuration, Subinterface Configuration
Chapter 10: I Commands
1115