Mpls Ldp Targeted-Hello Send List - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

mpls ldp targeted-hello send list

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls ldp targeted-hello send list
{ access-list accessListName | ipAddress [ ipAddress ]* }
Command introduced before JunosE Release 7.1.0.
Configures the list of peer addresses to which MPLS sends targeted hello messages and
from which MPLS accepts targeted hello messages. The no version removes the list of
peer addresses.
accessListName—String of up to 32 alphanumeric characters that identifies an access
list
ipAddress—IP address of a peer
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 13: M Commands
1369