JunosE 11.2.x Command Reference Guide A to M
ip static-route table-map
Syntax
Release Information
Description
Options
Mode
954
ip static-route table-map [ vrf vrfName ] mapName
no ip static-route table-map [ vrf vrfName ] [ mapName ]
Command introduced before JunosE Release 7.1.0.
Filters static routes before adding them to the routing table. The no version deletes the
table map.
vrfName—Name of the VRF; string of 1–32 alphanumeric characters
mapName—Name of the table map that you want the router to use
Global Configuration
Copyright © 2010, Juniper Networks, Inc.