Gsmp-Syn-Timeout - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
gsmp-syn-timeout
Syntax
Release Information
Description
Options
Mode
672
[ no ] gsmp-syn-timeout timeOutValue
Command introduced in JunosE Release 11.0.0.
Defines the ANCP neighbor session connection timeout value (in seconds). The neighbor
session connection is established on the TCP session.
The no version reverts the session timeout to its default setting (60 seconds).
timeOutValue— Session timeout in seconds. The timer value cannot be more than the
ANCP session timeout value. The default value for the ANCP session timeout is 75
seconds.
L2C Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
