Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual page 529

Mode
Copyright © 2010, Juniper Networks, Inc.
warning or 4—Warning condition
notice or 5—Normal but significant condition
info or 6—Informational message
debug or 7—Debug message
verbosityLevel—Verbosity of the log category's messages; can be any of the following:
low—Terse
medium—Moderate detail
high—Verbose
switchState—Switches from one type of tree to another
rpt-switch—Switch from a shortest-path tree to a shared path tree
spt-switch—Switch from a shared-path tree to a shortest path tree
groupAddress—IP address of the multicast group
sourceAddress—IP address of the multicast source
on—Turns on the specified PIM mode on all virtual routers
off—Turns off the specified PIM mode on all virtual routers
sg-state—Displays information about the relationship between a source, multicast
group, and RP router
rp—Displays information about the relationships between sources, groups, and the
specified RP router
rpAddress—Address of the RP router
count—Displays one of the following
(with no optional keywords) number of relationships between a source, multicast
group, and RP router
(with the group keyword) number of sources associated with the multicast group
for PIM sparse mode
(with the source and group keywords) number of source-group pairs for PIM sparse
mode
(with the rp keyword) number of source-group pairs associated with the RP router
for PIM sparse mode
Privileged Exec
Chapter 5: D Commands
485