Max-Response-Failure - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
max-response-failure
Syntax
Release Information
Description
Options
Mode
1290
max-response-failure maxFailureValue
no max-response-failure
Command introduced before JunosE Release 7.1.0.
Terminates a test when the maxFailureValue is reached. That is, when there is no response
to a designated number of operation requests, the test is terminated. This feature applies
only to pathEcho entries. The no version restores the default value, five consecutive
failures.
maxFailureValue—Number of operation requests not responded to; 0 turns this feature
off; default value is 5
RTR Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers