L2Vpn Rd - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
l2vpn rd
Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
l2vpn l2VpnName rd distinguisher
Command introduced in JunosE Release 8.1.0.
Specifies the unique two-part route distinguisher for the VPWS L2VPN instance. Once
configured, you cannot change or remove the route distinguisher. There is no no version.
l2VpnName—Name of the VPWS instance
distinguisher—Unique two-part identifier of the format number1:number2 where:
number1—AS number or an IP address
number2—Unique integer; 32 bits if number1 is an AS number; 16 bits if number1 is an
IP address
Global Configuration
Configuring an L2VPN Instance in the JunosE BGP and MPLS Configuration Guide
Chapter 12: L Commands
1195
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers