Isis Priority - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

isis priority

Syntax
Release Information
Description
Options
Mode
1128
isis priority value [ level-1 | level-2 ]
no isis priority [ level-1 | level-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the priority of this router for designated router election. The no version resets
priority to the default value, 64.
value—Number in the range 0–127; the priority of a router; default value is 64
level-1—Sets the priority of a router for level 1 independently
level-2—Sets priority of a router for level 2 independently
Interface Configuration, Subinterface Configuration
Copyright © 2010, Juniper Networks, Inc.