Ip Dhcp-Local Auth Password - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip dhcp-local auth password
Syntax
Release Information
Description
Options
Mode
764
[ no ] ip dhcp-local auth password password
Command introduced in JunosE Release 7.1.0.
Assigns a password used to authenticate a locally configured DHCP standalone mode
client. In DHCP standalone mode, the password is presented to AAA in an authentication
request. The no version removes the password.
password—String of 1–32 characters used as the password
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
