Ip Dvmrp Metric-Offset - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip dvmrp metric-offset
Syntax
Release Information
Description
Options
Mode
784
[ no ] ip dvmrp metric-offset { in | out } [ increment ]
Command introduced before JunosE Release 7.1.0.
Adjusts the number of hops associated with routes passing through an interface. This
action indicates that the route is more efficient or less efficient than an alternative route.
The no version restores the default values.
in—Increments the number of hops for a DVMRP route advertised in incoming DVMRP
reports. If you do not specify a key word, this option is the default.
out—Increments the number of hops for a DVMRP route advertised in outgoing DVMRP
reports
increment—Number of hops associated with this interface; default value is 1 for incoming
reports and 0 for outgoing reports.
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
