distance bgp
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
distance bgp externalDistance internalDistance localDistance
no distance bgp [ externalDistance [ internalDistance [ localDistance ] ] ]
Command introduced before JunosE Release 7.1.0.
Sets the administrative distances for BGP routes. A distance of 255 prevents the route
from being installed in the routing table. The no version restores the default values.
externalDistance—Administrative distance for routes external to the AS in the range
1–255; default value is 20
internalDistance—Administrative distance for routes internal to the AS in the range
1–255; default value is 200
localDistance—Administrative distance for local (redistributed) routes in the range
1–255; default value is 200
Address Family Configuration, Router Configuration
Chapter 5: D Commands
525