Mpls Match Exp-Bits - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

mpls match exp-bits

Syntax
Release Information
Description
Options
Mode
1376
mpls match exp-bits bitValue set traffic-class className color { green
| yellow | red }
no mpls match exp-bits bitValue
Command introduced before JunosE Release 7.1.0.
Sets the traffic class and color for incoming MPLS packets whose EXP bits in the MPLS
shim header match the specified EXP bits value. The no version reverts to the default
behavior for traffic matching the specified EXP bits value, setting neither traffic class nor
color.
bitValue—Value in the range 0–7 that matches the corresponding binary value (000–111)
for the three EXP bits
className—Name of a traffic class; the router supports up to eight traffic classes
green—Sets packet color to green, indicating a low drop preference
yellow—Sets packet color to yellow, indicating a medium drop preference
red—Sets packet color to red, indicating a high drop preference
Global Configuration
Copyright © 2010, Juniper Networks, Inc.