JunosE 11.2.x Command Reference Guide A to M
ipv6
Syntax
Release Information
Description
Mode
1006
[ no ] ipv6
Command introduced before JunosE Release 7.1.0.
Enables an IPv6 instance on a router that does not already have an explicit IPv6 address.
Normally, performing any IPv6 configuration automatically enables IPv6 on the interface.
The no version disables IPv6 on the router.
NOTE: Disabling IPv6 on the router disables all IPv6 unicast routing protocols.
Global Configuration
Copyright © 2010, Juniper Networks, Inc.