JunosE 11.2.x Command Reference Guide A to M
frame-relay intf-type
Syntax
Release Information
Description
Options
Mode
Related Topics
640
frame-relay intf-type type
no frame-relay intf-type
Command introduced before JunosE Release 7.1.0.
Configures a Frame Relay interface type. The no version restores the default value, DTE.
type—One of the following interface types:
dce—Router is connected to user DTE equipment
dte—Router is connected to a Frame Relay network; the default
nni—Router connects two Frame Relay networks
Interface Configuration
Configuring Frame Relay Layer 2 Services in the JunosE BGP and MPLS Configuration
Guide
Copyright © 2010, Juniper Networks, Inc.