Framing - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
framing
Syntax
Release Information
Description
Options
Mode
652
framing framingType
no framing
Command introduced before JunosE Release 7.1.0.
Specifies the framing mode used by E3 or T3 interfaces. Available modes vary by the
type of interface. The no version restores the default for that interface.
framingType—One of the following framing types:
E3 Frame
g751—Default; G.751 compliant frame
g832—G.832 compliant frame
T3
c-bit—Default; specifies c-bit parity framing
m23—Specifies M23 multiplexer framing
Controller Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers