Disable - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

disable

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
To return to User Exec mode:
disable [ level ]
For DVMRP, RIP:
[ no ] disable
Command introduced before JunosE Release 7.1.0.
When used from Privileged Exec mode, exits Privileged Exec mode and returns to User
Exec mode.
When used from Router Configuration or Interface Configuration mode in the context of
a DVMRP configuration, disables DVMRP on the virtual router or interface. The no version
reenables DVMRP on the virtual router or interface.
When used from Router Configuration mode in the context of a RIP configuration, disables
RIP on the virtual router. The no version enables RIP processing on the virtual router.
level—One of the following privilege levels; default value is 1
0—Allows the user to execute the help, enable, disable, and exit commands
1—Allows the user to execute commands in User Exec mode plus commands at level
0
5—Allows the user to execute Privileged Exec show commands plus the commands
at levels 1 and 0
10—Allows the user to execute all commands except support commands, which
may be provided by Juniper Networks Customer Service
15—Allows the user to execute support commands
Address Family Configuration (RIP), Interface Configuration (DVMRP only), Privileged
Exec, Router Configuration (DVMRP or RIP)
Chapter 5: D Commands
515