Clock Summer-Time Recurring - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

clock summer-time recurring

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
clock summer-time name recurring [ { startWeekNumber | startWeekEnum }
startDay startMonth startTime { stopWeekNumber | stopWeekEnum }
stopDay stopMonth stopTime [ dstOffset ] ]
no clock summer-time
Command introduced before JunosE Release 7.1.0.
Sets the router to automatically switch to summer time (Daylight Saving Time) on the
specified dates every year. The no version configures the software not to automatically
switch to summer time.
name—Name of the time zone (for example, EDT for Eastern Daylight Savings Time)
to be displayed when daylight saving (summer) time is in effect
recurring—Indicates that summer time should start and end on the specified days every
year
startWeekNumber—DST start week of the month (1–5)
startWeekEnum—First week in month (first); or last week in month (last)
startDay—DST start day of the week (Sunday, Monday, ...)
startMonth—DST start month (January, February, ...)
startTime—DST start time (24-hour format) in hours and minutes (hh:mm)
stopWeekNumber—DST stop week of the month (1–5)
stopWeekEnum—First week in month (first); or last week in month (last)
stopDay—DST stop day of the week
stopMonth—DST stop month
stopTime—DST stop time in hours and minutes (hh:mm)
dstOffset—Number of minutes to add during summer time in the range 1–1440; default
= 60
Global Configuration
Chapter 4: C Commands
435