Ip Flow-Export - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip flow-export
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip flow-export { hostName | ipAddress } udpPort version 5
[ peer-as | origin-as ]
[ no ] ip flow-export destination { hostName | ipAddress } udpPort
[ no ] ip flow-export source interfaceType interfaceSpecifier
[ no ] ip flow-export version 5 [ peer-as | origin-as ]
Command introduced before JunosE Release 7.1.0.
Defines J-Flow export values for the IP flow. The no version removes the export setting.
hostName—Name of the remote host for outgoing export datagrams
ipAddress—IP address of the export destination host
udpPort—UDP port number
version 5—Specifies version 5 of the J-Flow statistical information
peer-as—Exports peer-as information
origin-as—Exports origin-as information
destination—Specifies destination for outgoing export datagrams
source—Specifies source interface for outgoing export datagrams
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
Global Configuration
Chapter 10: I Commands
797
Advertisement
Table of Contents
