Key-String - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
key-string
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
key-string keyStringData
Command introduced in JunosE Release 7.1.0.
Manually configures a 1024-bit or 2048-bit ISAKMP/IKE public key that a remote peer
uses for RSA authentication without the need for a digital certificate. The key string
represents the public key hexadecimal data that includes the ASN.1 object identifier and
sequence tags for RSA encryption. There is no no version. To remove a peer public key
from the router, use the no version of the ipsec key pubkey-chain rsa command.
keyStringData—Alphanumeric string with a maximum length of 1999 characters;
delimited by the first character of the string, which must be repeated at the end of the
string and must not occur anywhere else in the string
IPSec Peer Public Key Configuration
Chapter 11: K Commands
1139
Advertisement
Table of Contents
