Ip Local Pool Warning - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip local pool warning
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip local pool name warning highUtilization abatedUtilization [ snmpTrap ]
no ip local pool name warning [ highUtilization abatedUtilization ]
Command introduced before JunosE Release 7.1.0.
Identifies the warning threshold values. The no version resets the thresholds to their
default values.
name—Text string in the range 1–16 characters that defines the name of the local
address pool
highUtilization—High utilization value; a number in the range 1–100; default value is 85
abatedUtilization—Abated utilization value; a number in the range 1–100; default value
is 75
snmpTrap—Enables snmp pool utilization traps
Global Configuration
Chapter 10: I Commands
843
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers