JunosE 11.2.x Command Reference Guide A to M
lag dos-protection-group
Syntax
Release Information
Description
Options
Mode
1202
lag dos-protection-group groupName
no lag dos-protection-group
Command introduced in JunosE Release 8.1.0.
Attaches a lag denial of service (DoS) protection group to an interface. The no version
removes the attachment of the DoS protection group from the interface.
groupName—Name of the DoS protection group; string of up to 31 alphanumeric
characters
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.