Group - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

group

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
To specify a group scheduler node for QoS:
[ no ] typeOfInterface group groupName scheduler-profile schedulerProfileName
To specify a Diffie-Hellman group:
group { 1 | 2 | 5 }
no group
Command introduced before JunosE Release 7.1.0.
From QoS Profile Configuration mode, specifies that a group scheduler node be configured
for each interface of the given interface type. The no version removes this rule from the
QoS profile.
From IKE Policy Configuration mode, assigns a Diffie-Hellman group to the IKE policy.
The no version restores the default, 1024-bit Diffie-Hellman group.
typeOfInterface—Interface types for group scheduler nodes to be configured: atm,
ethernet, serial, server-port
groupName—Name of the traffic class group
schedulerProfileName—Name of the scheduler profile
1—Specifies the 768-bit group
2—Specifies the 1024-bit group
5—Specifies the 1536-bit group
IKE Policy Configuration, QoS Profile Configuration
Configuring a QoS Profile
Configuring Shadow Nodes
Configuring QoS for an L2TP Session
Configuring QoS for Tunnel-Server Ports for L2TP LNS Sessions
Chapter 8: G Commands
671