Ip Ssh Crypto - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip ssh crypto
Syntax
Release Information
Description
Options
Mode
948
ip ssh crypto [ client-to-server | server-to-client ] [ no | default ] cipherAlgorithm
Command introduced before JunosE Release 7.1.0.
Adds an encryption algorithm to the specified list of supported algorithms. The no version
removes or excludes an algorithm from the specified list. The default version restores
the default algorithms for the specified list.
client-to-server—Adds the specified algorithm to the SSH server's list of supported
inbound algorithms
server-to-client—Adds the specified algorithm to the SSH server's list of supported
outbound algorithms
no—Removes or excludes the specified algorithm from the list
default—Restores the specified list to the factory defaults, which includes 3des-cbc,
twofish-cbc, and blowfish-cbc
cipherAlgorithm—Algorithm to add to the list
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
