Ipv6 Policy-Parameter Hierarchical - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

JunosE 11.2.x Command Reference Guide A to M

ipv6 policy-parameter hierarchical

Syntax
Release Information
Description
Options
Mode
Related Topics
1098
ipv6 policy-parameter hierarchical parameterName { nodeValue | atm | atm-vc | atm-vp
vpValue | ethernet | fr-vc | forwarding |
ppp-interface | svlan svlanValue | vlan }
no ipv6 policy-parameter parameterName
Command introduced in JunosE Release 8.0.0.
ppp-interface keyword added in JunosE Release 10.3.0.
Specifies a parameter value for IPv6 interfaces. The no version removes the policy
parameter and its contents.
parameterName—Name of policy parameter
nodeValue— Aggregation node number in the range 1–65535
vpValue—ATM VPI number in the range 0–255
svlanValue—S-VLAN ID number in the range 0–4095
Interface Configuration, Profile Configuration
Creating a Classifier Group for a Policy List
Copyright © 2010, Juniper Networks, Inc.