JunosE 11.2.x Command Reference Guide A to M
index
Syntax
Release Information
Description
Options
Mode
710
index indexNumber next-address ipAddress [ [ mask ] ipMask ] [ loose ]
no index indexNumber
Command introduced before JunosE Release 7.1.0.
Sets a next hop at a particular index in the MPLS explicit path. The no version removes
the next hop from the index.
indexNumber—Number of a node in an ordered set of abstract nodes; in the range
1–255
ipAddress—Address of the next hop
ipMask—[ not currently used] mask for the next adjacent address
loose—Node is not necessarily directly connected (adjacent) to the previous node in
the path. If loose is not configured, the configuration defaults to strict. Strict indicates
that the node is directly connected to the previous node.
Explicit Path Configuration
Copyright © 2010, Juniper Networks, Inc.