Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual page 576

JunosE 11.2.x Command Reference Guide A to M
do
Syntax
Release Information
Description
Options
Mode
532
do execCommand
Command introduced before JunosE Release 7.1.0.
Allows you to issue an Exec mode command from any configuration command mode.
This command functions the same as the run command. There is no no version.
execCommand—CLI command that you can issue from User Exec or Privileged Exec
mode
All configuration command modes
Copyright © 2010, Juniper Networks, Inc.