l2tp policy-list
Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
[ no ] l2tp policy-list [ policyName ]
Command introduced before JunosE Release 7.1.0.
Creates or modifies an L2TP policy list. If you enter an l2tp policy-list command and type
exit, the router creates a policy list with no rules. When a policy list does not have rules,
the router inserts a default filter rule. Attaching this policy list to an interface filters all
packets on that interface. The no version removes a policy list.
policyName—Name of the policy list
Global Configuration
Creating Policy Lists for L2TP
Chapter 12: L Commands
1173