Mpls Diff-Serv Phb-Id Traffic-Class - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

mpls diff-serv phb-id traffic-class

Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
mpls diff-serv phb-id { private privateId | standard standardId }
traffic-class className [ color { green | yellow | red } ]
no mpls diff-serv phb-id { private privateId | standard standardId }
Command introduced before JunosE Release 7.1.0.
Maps the specified PHB ID to the internal traffic class and color combination. If color is
specified, the PHB ID can be used only for E-LSPs. If color is not specified, the PHB ID can
be used only for L-LSPs. The no version removes the mapping.
privateId—Number in the range 0–4032 designating the private PHB identifier
standardId—Number in the range 0–63 designating the standard PHB identifier using
the DSCP bits
className—Name of a traffic class; the router supports up to eight traffic classes
green—Sets packet color to green, indicating a low drop preference
yellow—Sets packet color to yellow, indicating a medium drop preference
red—Sets packet color to red, indicating a high drop preference
Global Configuration
Chapter 13: M Commands
1335