Lifetime - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

lifetime

Syntax
Release Information
Description
Options
Copyright © 2010, Juniper Networks, Inc.
To set an IKE lifetime:
lifetime seconds
no lifetime
To set an IPSec transport profile lifetime:
lifetime { kilobytes lowKilobytes highKilobytes | seconds txLowSeconds txHighSeconds |
seconds txLowSeconds txHighSeconds kilobytes lowKilobytes highKilobytes }
no lifetime
To set an IPSec tunnel profile lifetime:
lifetime { seconds tunLowSeconds tunHighSeconds | kilobytes lowKilobytes highKilobytes
| seconds tunLowSeconds tunHighSeconds kilobytes lowKilobytes highKilobytes }
no lifetime
Command introduced before JunosE Release 7.1.0.
IPSec Tunnel Profile Configuration mode added in JunosE Release 7.3.0.
From IKE Policy Configuration mode, associates a lifetime with IKE SAs established with
this IKE policy. The no version restores the lifetime to its default, 28800 seconds (8
hours).
From IPSec Transport Profile Configuration mode, sets a lifetime range for the IPSec
connection in volume of traffic and/or in seconds. If the client PC offers a lifetime within
this range, the router accepts the offer. The no version returns the lifetime to the default,
100000–4294967295 KB and 900–86400 seconds (1–24 hours).
From IPSec Tunnel Profile Configuration mode, specifies the IPSec lifetime range used
on IPSec security association negotiations. The no version returns the lifetime to its
default, 28800 seconds (8 hours) and no traffic volume limit.
seconds—Number of seconds an SA lives before expiring; in the range 900–86400
seconds
lowKilobytes—Lower range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 100000
highKilobytes—Higher range of the lifetime in kilobytes; in the range
100000–4294967295 KB; default value is 4294967295
txLowSeconds—Lower range of the lifetime in seconds; in the range 300–86400
seconds; default value is 3600
txHighSeconds—Higher range of the lifetime in seconds; in the range 300–86400
seconds; default value is 86400
Chapter 12: L Commands
1213