Ip Dhcp-Local Cable-Modem - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
ip dhcp-local cable-modem
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] ip dhcp-local cable-modem dhcp-server ipAddress
Command introduced before JunosE Release 7.1.0.
Specifies the IP address of the external DHCP server to which the DHCP local server will
relay DHCP messages from cable modems. The no version removes the cable modem
configuration.
NOTE: This command is deprecated and might be removed completely in a future
release. Use the set dhcp vendor-option command to configure the vendor class
identifier option to match the string used by cable modems to replace the function of
this command.
ipAddress—IP address of the cable modem DHCP server
Global Configuration
Chapter 10: I Commands
767
Advertisement
Table of Contents
