Dns-Server (For Ipv6) - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
dns-server (for IPv6)
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
dns-server ipv6AddressPrimary [ ipv6AddressSecondary ]
no dns-server
Command introduced in JunosE Release 10.1.0.
Configures the primary and secondary IPv6 DNS server addresses in the IPv6 local address
pool. The DNS server addresses are returned to the client in DHCPv6 responses as part
of the DNS Recursive Name Server option. The no version removes the configured DNS
server addresses.
ipv6AddressPrimary—IPv6 address of the primary DNS server.
ipv6AddressSecondary—IPv6 address of the secondary DNS server.
IPv6 Local Pool Configuration
Chapter 5: D Commands
531
Advertisement
Table of Contents
