Mpls Topology-Driven-Lsp - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
mpls topology-driven-lsp
Syntax
Release Information
Description
Mode
Copyright © 2010, Juniper Networks, Inc.
[ no ] mpls topology-driven-lsp
Command introduced before JunosE Release 7.1.0.
Enables topology-driven LSP creation on the virtual router where the LSR automatically
creates LSPs when it learns a new IGP route. In the context of the VRF virtual router,
enables carrier-of-carriers support on the provider carrier's PE router.
The router advertises labels for new routes immediately to all peers without waiting for
a label request message from an upstream peer or a label mapping message from a
downstream peer. This mode is downstream-unsolicited, independent control.
The no version disables topology-driven LSPs on the virtual router.
Global Configuration
Chapter 13: M Commands
1411
Advertisement
Table of Contents
