L2Vpn Encapsulation-Type - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual

l2vpn encapsulation-type

Syntax
Release Information
Description
Options
Mode
Related Topics
Copyright © 2010, Juniper Networks, Inc.
l2vpn l2VpnName encapsulation-type { atm-aal5-vcc | atm-vcc-cell | cisco-hdlc |
ethernet | frame-relay | ppp | vlan }
no l2vpn l2VpnName
Command introduced in JunosE Release 8.1.0.
Creates a VPWS L2VPN instance and configures the encapsulation type for interfaces
in that VPWS instance. The no version removes the VPWS instance.
l2VpnName—Name of the VPWS instance
atm-aal5-vcc—Specifies ATM AAL5 VCC encapsulation
atm-vcc-cell—Specifies ATM VCC Cell encapsulation
cisco-hdlc—Specifies Cisco HDLC encapsulation
ethernet—Specifies Ethernet encapsulation
frame-relay—Specifies Frame-Relay encapsulation
ppp—Specifies PPP encapsulation
vlan—Specifies VLAN encapsulation
Global Configuration
Configuring an L2VPN Instance in the JunosE BGP and MPLS Configuration Guide
Chapter 12: L Commands
1193