Metric-Style Wide - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
metric-style wide
Syntax
Release Information
Description
Options
Mode
1308
[ no ] metric-style wide [ transition ] [ level-1 | level-2 | level-1-2 ]
Command introduced before JunosE Release 7.1.0.
Configures the router to generate and accept only new-style IS-IS TLVs with wider metric
fields. If you issue this command, the value configured with the isis metric command can
range from 0–16777215. The no version restores the default value, which is to generate
and accept only old-style TLVs with narrow (six-bit) metric fields.
transition—Configures the router to additionally accept old-style TLVs with narrow
(six-bit) metric fields
level-1—Configuration applies only to level 1 routing
level-2—Configuration applies only to level 2 routing
level-1-2—Configuration applies to both level 1 and level 2 routing
Router Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?
Questions and answers