Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual page 1277

Mode
Copyright © 2010, Juniper Networks, Inc.
warning or 4—Warning condition
notice or 5—Normal but significant condition
info or 6—Informational message
debug or 7—Debug message
off—Disables logging to this destination
include—Sends only the specified event categories to the system log server
exclude—Sends all event categories except those specified to the system log server
Issuing an includecommand after an excludecommand (or vice versa) overrides the
earlier command.
You can issue successive includecommands or successive excludecommands.
Successive commands expand the list of included or excluded categories.
category—Log category; refer to the CLI online Help for available options
*—Indicates that one or more parameters can be repeated multiple times in a list in
the command line
Global Configuration
Chapter 12: L Commands
1233