Interface - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
interface
Syntax
Release Information
Description
Options
Mode
712
[ no ] interface interfaceType interfaceSpecifier [ extension ]
Command introduced before JunosE Release 7.1.0.
Configures an interface. The no version removes the subinterface or the logical interface.
NOTE: See the individual interface command entries for the syntax for each type of
interface.
interfaceType—Interface type; see Interface Types and Specifiers on page 5
interfaceSpecifier—Particular interface; format varies according to interface type; see
Interface Types and Specifiers on page 5
extension—Option that depends on the type of interface
Global Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
