ip vrrp authentication-key
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
ip vrrp vrid authentication-key key
no ip vrrp vrid authentication-key
Command introduced before JunosE Release 7.1.0.
Specifies the authentication key. This command is only valid if the text keyword was
selected in the ip vrrp authentication-type command. The no version negates the
command or restores the default.
vrid—VRID identifier; a number in the range 1–255
key—String of 1–8 characters
Interface Configuration
Chapter 10: I Commands
969