Frame-Relay Lmi-T391Dte - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
frame-relay lmi-t391dte
Syntax
Release Information
Description
Options
Mode
Copyright © 2010, Juniper Networks, Inc.
frame-relay lmi-t391dte seconds
no frame-relay lmi-t391dte
Command introduced before JunosE Release 7.1.0.
Sets the link integrity verification polling timer (T391) on a DTE interface. The no version
removes the current setting and sets the default.
seconds—Number in the range 5–30 seconds; specifies the interval in seconds between
status inquiries issued by the DTE; default value is 10 seconds
Interface Configuration
Chapter 7: F Commands
647
Advertisement
Table of Contents
