Frame-Relay Lmi-T392Dce - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
frame-relay lmi-t392dce
Syntax
Release Information
Description
Options
Mode
648
frame-relay lmi-t392dce seconds
no frame-relay lmi-t392dce
Command introduced before JunosE Release 7.1.0.
Sets the polling verification timer (T392) on a DCE interface. The no version removes
current setting and sets the default.
seconds—Number in the range 5–30 seconds; specifies the expected interval in seconds
between status inquiries issued by the DTE equipment; default value is 15 seconds
Interface Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
Need help?
Do you have a question about the JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 and is the answer not in the manual?