Import Map - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
import map
Syntax
Release Information
Description
Options
Mode
702
import map [ ipv4 | ipv6 ] routeMap
no import map [ ipv4 | ipv6 ]
Command introduced before JunosE Release 7.1.0.
Associates a route map with a VRF to modify and filter routes imported by the VRF from
the global BGP VPN RIB. Both IPv4 and IPv6 routes are imported unless you issue the
appropriate keyword to restrict importation. The no version enables all routes whose
route targets match the import route targets of the VRF to be imported without applying
a route map.
ipv4—Specifies that only IPv4 routes are imported from the global BGP VPN RIB
ipv6—Specifies that only IPv6 routes are imported from the global BGP VPN RIB
routeMap—Name of a route map; string of up to 32 alphanumeric characters
VRF Configuration
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
