Ip Igmp Ssm-Map Static - Juniper JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010 Command Reference Manual
Software for e series broadband services routers command reference a to m
Hide thumbs
Also See for JUNOSE SOFTWARE 11.2.X - XML MANAGEMENT PROTOCOL GUIDE 6-30-2010:
- Manual (282 pages)
Table of Contents
Advertisement
JunosE 11.2.x Command Reference Guide A to M
ip igmp ssm-map static
Syntax
Release Information
Description
Options
Mode
830
[ no ] ip igmp ssm-map static accessListName sourceAddress
Command introduced before JunosE Release 7.1.0.
Specifies an access list and source address for use in SSM mapping. SSM mapping
statically assigns sources to IGMPv1 and IGMPv2 groups. You must use SSM mapping
for IGMPv1 and IGMPv2 hosts to interoperate with PIM SSM. SSM mapping allows the
router to use a statically configured list to translate (* ,G) memberships to (S,G)
memberships. The no version removes the SSM map association.
accessListName—Name of the access control list
sourceAddress—Address of the source
Privileged Exec, User Exec
Copyright © 2010, Juniper Networks, Inc.
Advertisement
Table of Contents
